THE AT-HOME SUPPER CLUB

Cricut Place Cards

Plan, cut and finish DIY place cards on a Cricut cutting machine, from cardstock and pens to engraved and vinyl versions for your table.

9 min read0 views
— · 0 votes
Contents
  1. What a Cricut place card involves
  2. Set up the card design in Design Space
  3. Cut cardstock place cards
  4. Write names with a pen
  5. Build table cards that suit the setting
  6. Try engraved or vinyl place cards
  7. Check the names before you cut
  8. Finish and lay out the set
  9. Questions about Cricut place cards
  10. Can I make DIY place cards on a Cricut?
  11. How do I get the names onto the cards?
  12. What material should I cut for place cards?
  13. How do I make place cards for a table with many guests?
  14. Do I need a special tool to write with the Cricut?

A Cricut makes place cards by cutting cardstock or vinyl into a shape you design in Cricut Design Space, then writing names with a pen or marker. You set the size and layout on screen, load the mat, and let the machine cut and draw each card. The result is a matched set of table place cards that fits your seating plan.

  • Design each place card in Cricut Design Space at the size of your folded card, then duplicate it across the mat.
  • Cardstock is the straightforward material for cut place cards; vinyl suits added lettering and engraved blanks suit a reusable set.
  • A pen or fine marker inserted in the machine writes names in a clean hand, so you skip handwriting each card.
  • Settle the seating list before you cut, because each card carries one name and one place.
  • Test one card first to check the fold, the name fit and how your material behaves on the mat.

What a Cricut place card involves

A Cricut place card is a small card, cut and often written on by a Cricut cutting machine, that marks each seat at a table. The machine handles the shape and any lettering while you decide the names and the seating order. A card can be flat, folded like a tent, or a small tag tied to a napkin.

The work splits into three stages: designing in Cricut Design Space, preparing the material on a mat, and finishing the cards by folding or attaching them. Design Space is the software where you size the card and place each name on the page. The mat holds the material steady while the machine moves its blade or pen.

Place cards differ from a full table plan because each one carries a single name and sits at one setting. A seating chart labels the whole room, while cards greet each guest at the place they take. Making them on a Cricut keeps the set consistent in size, font and color across the table.

Set up the card design in Design Space

Cricut Design Space holds the design for your place cards, and the first decision is the finished size of one card. A folded tent card needs a shape about twice as tall as the visible front, so measure your chosen size and build to it. Keep the name inside a margin so the writing stays clear of the cut edge.

Create one card, then duplicate it across the canvas until you have one card for each guest. Typing each name into its own copy keeps every card tied to the right seat. Group the cards to match your seating plan, table by table, so you can check the list before cutting.

Choose a font that stays readable at a small size, and check how a name fits before you commit to the material. Long names may need a smaller size or a wider card, and this is easier to adjust on screen than after cutting. Save the design so you can return to it if a guest list changes.

Cut cardstock place cards

Cardstock is the material to reach for when you want a folded, sturdy place card with a clean cut edge. The cutting machine slices the card shape from a sheet held on a mat, and heavier cardstock holds a tent fold without sagging. A light color takes pen writing clearly and shows a printed or drawn name well.

Set the machine to the cardstock setting and run a test cut on a scrap of the same sheet before cutting the full set. A test cut shows whether the blade goes through the sheet or tears the fibers. Adjust the pressure on the machine if the cut is incomplete or the card edges look ragged.

Keep the card grain and the fold line in mind when you place the shape on the mat. A fold that runs along the grain bends cleanly, while a fold across it can crack the surface. Crease each card with a bone folder or the machine's scoring tool before you fold it.

Write names with a pen

A Cricut pen turns the machine into a writer, so the names on your place cards get a consistent hand across the whole set. You swap the blade housing for a pen adapter or a pen housing that fits your machine, and Design Space sends the name as a draw line. The machine then moves the pen along the letter shapes instead of cutting them.

How to make place cards on Cricut with a pen comes down to two steps: attach the draw operation to the name text, then tell the machine to draw before it cuts. Drawing first keeps the card flat on the mat when the pen moves across it. The cut line then frees the card from the sheet.

Pen writing works best on smooth cardstock, because a textured surface pulls at a fine tip. Choose a pen color that contrasts with the card and check that the ink dries before you stack finished cards. Names written in a simple script or a clean block font stay legible at the table.

Build table cards that suit the setting

How to make table place cards on Cricut depends on the look of the table: a tent card, a flat card or a small tag each needs a different shape. A tent card stands alone, a flat card can rest on a folded napkin, and a tag needs a tie or a small clip. Decide the format before you design, because it changes the card size and the fold.

Match the card material to the rest of the table setting so the set feels intentional rather than added on. Colored cardstock, metallic accents and layered shapes all cut on the same machine. Keep the lettering in one font family across the table so the names read as a set.

Plan the seating list before you cut the set, since each card names one guest and one place. Last-minute guest changes are easier when you keep a few blank cards and a pen on hand. Write the table number or the course on the back if your gathering uses several tables.

Try engraved or vinyl place cards

Engraved place cards suit a reusable set, because the machine etches the name into a blank instead of cutting paper. An engraving tool scratches a shallow line into metal, acrylic or wood blanks held on the mat. The result is a firm card that wipes clean and can return to the table at another gathering.

Vinyl cutting gives crisp lettering for names applied to a card blank or a small sign. The machine cuts the vinyl sheet, you weed away the excess, and transfer tape lifts the letters onto the card. Vinyl suits a bold name in a solid color, while pen writing suits a softer handwritten look.

The table below compares the three approaches so you can pick one for your gathering. Engraving needs a blank and an engraving tool, vinyl needs transfer tape, and cardstock needs only the sheet and a mat. Each option uses the same design file, so you can switch approach without redrawing the names.

ApproachMaterialExtra toolFinish
Pen writingCardstockPen housingHandwritten name on a cut card
Vinyl letteringVinyl sheet on a blankTransfer tapeCrisp applied lettering
EngravingMetal, acrylic or wood blankEngraving toolPermanent etched name

Check the names before you cut

Spelling and seating are the two errors that show up once the cards are on the table, so check both before the machine starts. Read each name aloud against your guest list and confirm the table assignment beside it. A card cut with the wrong name cannot be corrected without cutting a new one.

Check the name fits the card at the size you chose, since a long name can crowd the margin. Preview the draw lines in Design Space to see how the letters sit within the card shape. Adjust the size or the layout on screen rather than trimming a finished card.

Count the cards against the final guest count and add a couple of blanks for late changes. Keep the spare blanks with the pen so a name can be added at the table. A checked list saves a second cutting session the night before the gathering.

Finish and lay out the set

Finishing turns cut shapes into place cards, and the fold or attachment is what makes each one stand. Fold tent cards along the scored line and press the crease flat with a bone folder. Flat cards can rest on a napkin or sit in a small holder, and tags need a tie or clip.

Lay the finished cards out in seating order before you set the table, so each card lands at the right place. Group them by table if your gathering uses more than one, and stack them in the order guests will arrive. A tray keeps the set together while you carry it to the table.

Store the cards flat and away from moisture until the gathering, since damp cardstock curls at the fold. Vinyl lettering and engraved blanks tolerate handling better than paper, which can crease. Set the cards out once the table is laid so nothing rests on top of them.

Questions about Cricut place cards

Can I make DIY place cards on a Cricut?

Yes, a Cricut cutting machine handles DIY place cards from design to finished card. You design the card in Cricut Design Space, cut cardstock or vinyl on a mat, and finish the set by folding or attaching each card. The machine keeps the size and lettering consistent across the table.

How do I get the names onto the cards?

You get names onto place cards either with a pen in the machine or with cut lettering applied to the card. A pen housing lets the machine draw each name as a line, while vinyl cutting produces letters you transfer to the surface. Both methods use the same name text in Design Space.

What material should I cut for place cards?

Cardstock is the material for folded paper place cards because it takes a fold and a pen line well. Vinyl suits applied lettering on a blank, and engraving blanks in metal or acrylic suit a reusable set. Pick the material to match how the cards will be finished and stored.

How do I make place cards for a table with many guests?

Make place cards for many guests by duplicating one design across the canvas and typing each name into its own copy. Group the copies by table so the seating plan stays clear while you work. Cut the set in batches if the mat holds fewer cards than you need.

Do I need a special tool to write with the Cricut?

Yes, writing on a Cricut needs a pen housing or adapter that holds a pen in place of the blade. The housing fits your machine model, and Design Space sends the name as a draw line. Check that the pen tip suits the cardstock before you write the full set.

Read next

Latest articles