# What to Do When Only Part of the House Loses Power

A calm walk-through for a partial blackout during a gathering: check the panel, reset a tripped breaker or GFCI, test outlets, and decide when to call an electrician.

When only part of the house loses power, the cause is often a tripped breaker or a tripped GFCI outlet on one circuit, not a full outage. This page walks you through a partial blackout step by step while guests are in the house. You will check whether the neighbors lost power, look at the circuit breaker panel, reset what can be reset safely, and know when the job belongs to an electrician. 

## Check the neighbors before the panel 

A neighbor outage check comes first because it tells you whether the problem is yours alone. Look outside at nearby windows and ask a neighbor whether their lights went out at the same moment. If the surrounding homes are dark too, the fault sits on the supply side and no breaker in your house will fix it. If the neighbors have power, the fault is inside your wiring or your panel and you can keep going. 

## Read the circuit breaker panel calmly 

A tripped breaker usually sits in a middle position rather than fully on or fully off, and the circuit breaker panel labels tell you which rooms it serves. Open the panel door only with dry hands and stand on a dry floor, and keep guests and children away from the panel while you work. Compare each breaker with its label to find the circuit that feeds the dark rooms. If a breaker trips again right after you reset it, stop and leave it alone. 

## Test outlets and reset a GFCI 

A GFCI reset is the fix when the dead outlets are in a kitchen, bathroom, garage or outdoor area, because one GFCI device protects the outlets downstream of it. Press the reset button firmly on each GFCI outlet you can find, and check the outlet that the device protects before you assume the circuit is dead. A quick outlet check with a lamp or a small appliance confirms whether power has returned. Keep the reset within reach and move the gathering to a lit room while you work. 

## Questions about a partial power loss 

### What do I do first when the power goes out in part of the house? 

Check the neighbors before you touch anything, because a partial blackout limited to your home points to your own panel or wiring. If nearby homes are dark as well, the cause is outside and you wait for the supply to return. If they have power, go to the circuit breaker panel with dry hands and look for a breaker in the middle position. 

### How can I tell whether a breaker has tripped? 

A tripped breaker does not sit fully in the on or off position, so it stands out against the others in the circuit breaker panel. The label beside it should name the rooms that lost power, which confirms you found the right circuit. Flip it fully off and then back on once, and call an electrician if it trips again. 

### Why did only some outlets stop working? 

Only some outlets stop working when a single circuit has lost power, and a GFCI device on that circuit is a frequent cause. Press the reset button on each GFCI outlet in the kitchen, bathroom, garage or outdoors before you suspect the panel. One tripped GFCI can cut power to several outlets downstream of it, so the outlet check matters. 

### When should I call an electrician instead of resetting things myself? 

Call an electrician when a breaker trips again straight after a reset, when you smell burning or see scorch marks, or when the panel feels warm. Those signs point to a fault inside the wiring that a reset cannot fix, and the work needs a trained specialist. Move guests away from the panel and keep the circuit off until help arrives.
