# Replace LED Bulbs in String Lights

Steps to swap a dead LED bulb on a light string safely, match the bulb base type, and see why one failed bulb can darken a whole section.

Replacing LED bulbs in string lights means unplugging the set and fitting an identical spare bulb. Only sets with removable bulbs allow this, since many LED strings have the diodes sealed into the wire. The steps below cover finding the dead bulb, pulling it out, and matching the bulb base type. You also learn when a damaged socket or wire means the whole set should go. 

## Steps to swap a removable LED bulb 

Swapping a removable LED bulb in a light string starts with unplugging the set from power. Grip the plastic base of the dead bulb and pull it straight out of the socket. Twisting or bending the base can snap the thin wire leads that touch the socket contacts. Push the new bulb in firmly until its base sits flush, then plug the set back in. 

## Match the bulb base type and voltage 

A replacement LED bulb must match the bulb base type, voltage and color of the original. The base type is the shape of the plastic or metal end that fits the socket. Spare bulbs packed with the set, or details printed on the plug tag, show the right match. Mixing incandescent and LED bulbs on one string can cause uneven brightness or overheating. 

## Why one dead bulb darkens a section 

One dead or loose LED bulb can darken a whole section of string light wiring. In a series-wired set, current passes through every bulb in turn. A shunt is a tiny wire bridge inside some bulbs that keeps current flowing after the bulb fails. Some LED bulbs lack a shunt, so check each bulb in the dark section for a loose fit. 

## LED string light bulb questions 

### Can you replace bulbs on LED string lights that look sealed? 

No, LED string lights with sealed bulbs cannot be repaired by swapping a bulb. Their diodes are molded into the wire or the cover, with no removable base. Cutting into a sealed set exposes live conductors and can create a shock or fire risk. Such a set needs full replacement once a section stops lighting. 

### What should I do if a bulb socket is broken? 

A broken socket on string lights is a reason to retire the set rather than repair it. Replacement bulb sockets are sold for some sets, but fitting one means opening the insulated wiring. Only a trained electrician should splice or rewire a socket on a mains-powered string. 

### Why does the string stay dark after I replace a bulb? 

A string that stays dark after a bulb swap often has a second dead or loose bulb. Check that every bulb in the dark section sits fully in its socket. A blown fuse in the plug can also cut power to the whole set. With the set unplugged, swap the fuse only for one with the rating printed on the plug. 

### Do I need to keep spare bulbs? 

Yes, keeping the spare bulbs that come with string lights saves hunting for an exact match later. Bulb shapes, base types and color tones differ between sets, even from one maker. Store the spares in a labeled bag taped to the box with the set. Adding a spare check to the pre-party list helps catch a dark section before guests arrive.
