# Paper for Address Label Printers

Learn how address label printer paper works, from label sheets and adhesive stock to sheet size, inkjet and laser paper, and choosing the right roll material.

Paper for address label printers is a sheet or roll of adhesive label stock that feeds through a printer to make peel-and-stick address labels. The paper must match your printer type, the label sheet size your layout needs, and the way you plan to handle and store the finished labels. This page explains the options in plain terms so you can pick the right stock before you print. 

## Sheets versus rolls for labels 

Address label paper comes as flat label sheets or as a continuous roll, and each format suits a different printer. Label sheets feed through a standard sheet-fed printer and let you print a page of labels in one pass. Rolls feed through dedicated label printers and give a steady stream of labels for repeated runs. Choose the format your printer is built to accept, because a sheet printer cannot pull a roll and a roll printer cannot grip a loose sheet. 

## Match the stock to your printer 

Inkjet label paper and laser label paper differ in how they hold the ink or toner placed on them. Inkjet label paper has a coating that absorbs wet ink so lines stay sharp and do not bleed. Laser label paper is built to take heat and pressure inside a laser printer without curling or jamming. Using the wrong stock can smudge the print or leave adhesive residue inside the machine, so check the printer instructions before loading. 

## Sheet size and label layout 

Sheet size and the label layout cut into it decide where each address sits once printed. Adhesive label stock is sold in standard sheet sizes with a set grid of labels per page, and the grid must match the template you use in your software. Measure the label dimensions and the spacing between them before printing a full run. A test print on plain paper helps confirm alignment before you commit a sheet of labels. 

## Questions About Address Label Paper 

### What is address label printer paper? 

Address label printer paper is adhesive label stock made to pass through a printer and come out as peel-and-stick labels. It is sold as flat label sheets or as label roll material, depending on the printer. The face is coated for ink or toner, and the back carries a removable liner over the adhesive. 

### Can I use regular paper for address labels? 

Regular paper cannot serve as address label paper because it has no adhesive and will not stick to an envelope. You need adhesive label stock with a liner that releases cleanly when peeled. Printing addresses on plain paper and gluing them on is a separate method with a different finish. 

### Which is better, inkjet or laser label paper? 

The right choice depends on the printer you own rather than on one paper being superior. Inkjet label paper absorbs wet ink, while laser label paper withstands the heat and pressure of a laser printer. Match the stock to the printer type shown in the printer manual to avoid smudging or jams. 

### How do I choose the right sheet size and layout? 

Choose address label paper whose sheet size fits your printer and whose label grid matches your address template. Check the label dimensions and the gap between labels before you print a full run. A test print on plain paper confirms alignment before you use a sheet of adhesive stock.
