How to Put an Egg Chair Cover On
Learn how to put an egg chair cover on with a clear step-by-step method, from checking the fit to smoothing seams, so your rounded chair looks crisp.
Contents
- Check the cover fit before you start
- Clear the chair and prepare the cover
- Work the cover down from the top
- Pull the hem around the base
- Smooth seams and tuck the edges
- Fitting options for different covers
- Keep the cover in place and care for it
- Egg chair cover questions
- How do I put an egg chair cover on by myself?
- Should the cover go on before or after the cushion?
- What if the egg chair cover fit is too tight?
- How do I stop the cover from slipping off the chair?
- Can a rounded chair cover be washed while it is on the chair?
Putting an egg chair cover on is a matter of working from the top of the curved back down to the seat, easing fabric over the widest point before you tuck the edges. The cover goes on more easily when the chair is empty and the fabric is aligned with the opening first. A steady, patient pull in small stages keeps the seams straight and the fit snug.
- Stretch the cover over the top of the curved back first, then work downward.
- Ease the fabric across the widest point of the shell before pulling the hem into place.
- Line up the seams and the opening with the chair's frame so the cover sits straight.
- Tuck the hem firmly around the base to stop the cover from shifting when the chair is used.
- Let the fabric settle for a while before deciding the fit is wrong.
Check the cover fit before you start
An egg chair cover fits well when its dimensions match the shell's height, width and depth, so measure the chair before buying or fitting one. A slipcover made for a rounded chair follows the curve of the back and wraps under the seat. Check that the opening of the cover lines up with the opening of the chair.
Egg chair cover fit depends on the shape of the shell as much as its size, since some shells are deeper or rounder than others. Hold the cover against the chair and look at where the seams fall. A cover that is too tight will pull at the stitching, while a loose cover will bunch at the base.
Stretch the fabric gently between your hands to see how much give it has before you commit. Fabric with a little elasticity slides over the shell more easily. If the cover has ties, zippers or elastic hems, check that each part is intact and works.
Clear the chair and prepare the cover
The chair needs to be empty and steady before you put a cover on it, so remove cushions, throws and anything tucked into the frame. Place the chair where you have room to walk around it. A second person helps on larger shells, holding the cover steady while you pull.
Turn the cover inside out if it has a lining or a shaped back, then find the top edge. Lay the cover over the chair so the back seam sits against the center of the shell. Match any strap or opening with the frame before you stretch anything.
Smooth the fabric with your hands as you go instead of pulling hard at one point. Sharp edges on a metal frame can catch thin fabric, so run a hand along the frame first. A cover put on in a warm room stretches more easily than one fitted in the cold.
Work the cover down from the top
Start at the top of the curved back and pull the cover down in short stages, pressing the fabric against the shell as you go. Pulling from the top lets the fabric follow the curve instead of fighting it. Keep both hands close together so the stretch stays even.
At the widest point of the shell, ease the cover across rather than yanking it. Work one side a little, then the other, until the cover passes the widest part. The fabric should sit flat over the shoulders of the chair with no diagonal wrinkles.
Move to the seat area once the back is covered, and press the fabric into the corner where the back meets the seat. A rounded chair cover sits best when the fabric is pushed into the seams of the shell. Smooth each section before moving to the next.
Pull the hem around the base
The hem is the last part of the cover to go on, and it needs to wrap under or around the base of the egg chair. Reach under the seat and pull the edges down evenly on each side. Keep the tension the same all the way around so the cover does not twist.
If the cover has an elastic hem, stretch it around the base one section at a time. For a cover with ties, fasten them under the seat once the hem is in place. A cover with a zip should have the zip closed before you stretch the fabric into position.
Check that the opening of the cover is centered on the opening of the chair. A hem that sits unevenly pulls the whole cover to one side. Adjust the hem before you tuck anything in, since correcting it later takes longer.
Smooth seams and tuck the edges
Run your hands over the seams of the cover and line each one up with the frame beneath. Straight seams make the chair look tailored rather than pulled on. Press the fabric into the gap between the seat and the shell so it holds.
Tuck the loose fabric at the base under the seat or into the frame, working around the chair in one direction. Tucking in a circle keeps the tension even and stops the cover from creeping. Leave a little slack at the corners where the fabric folds.
Smooth out wrinkles with the flat of your hand from the center of each panel outward. Do not pull the fabric so tight that the seams strain. A cover that sits with slight ease will stay in place better than one stretched to its limit.
Fitting options for different covers
Egg chair covers come as slipcovers that stretch over the shell, as zipped covers that open along a seam, and as covers with ties or elastic at the hem. Each type goes on in a slightly different order. Match the method to the fastening your cover uses.
A zipped cover goes on with the zip open and is closed once the fabric is positioned. A tie-on cover is pulled into place first and fastened afterward. An elastic cover is stretched over the shell from the top and eased down to the base.
The order of work stays the same across types, moving from the top of the back to the seat and then the hem. Choose the cover style that matches how often you plan to remove it. A cover that comes off easily is simpler to clean.
| Cover type | When to fasten | Easiest starting point |
|---|---|---|
| Slipcover | No fastening | Top of the curved back |
| Zipped cover | Close the zip after positioning | Top edge, zip open |
| Tie-on cover | Tie after the cover sits | Back seam first |
| Elastic hem cover | Hem last | Widest point of the shell |
Keep the cover in place and care for it
A cover stays in place when the hem is tucked firmly and the seams are aligned with the frame. Check the tuck after the chair has been used a few times. Loose fabric at the base is the first sign that the cover needs refitting.
Clean the cover according to its fabric label, and remove it before washing rather than cleaning it on the chair. Refit the cover while the fabric is slightly damp if the label allows, since a little moisture helps it settle. Let the cover dry fully before the chair is used.
Store a spare cover folded flat rather than crumpled, so it keeps its shape for the next fitting. Check the frame for rough spots before each refit. A smooth frame protects both the cover and the fabric underneath.
Egg chair cover questions
How do I put an egg chair cover on by myself?
You can put an egg chair cover on alone by starting at the top of the curved back and working downward in short pulls. Turn the chair so you can reach both sides, and press the fabric against the shell as you go. A second person makes the job easier on a large shell but is not required.
Should the cover go on before or after the cushion?
The cover goes on before the cushion, since the fabric needs to wrap around the bare shell first. Fit the cover over the frame, tuck the hem at the base, then place the cushion back on the seat. A cushion put in first gets in the way of the hem.
What if the egg chair cover fit is too tight?
An egg chair cover that fits too tight will pull at the seams and may not reach the hem. Check that the cover is the right size for the shell before forcing it, and let the fabric warm in the room first. A cover that still will not reach the base is the wrong size for that chair.
How do I stop the cover from slipping off the chair?
A cover stays on when the hem is tucked firmly under the seat and the seams are lined up with the frame. Fasten any ties or zips fully, and press the fabric into the gap where the back meets the seat. Refit the cover if the base works loose after use.
Can a rounded chair cover be washed while it is on the chair?
A rounded chair cover should be removed before washing, following the care label for the fabric. Cleaning it on the chair risks wetting the frame and the cushion. Let the cover dry completely, then refit it starting from the top of the back.