THE AT-HOME SUPPER CLUB

Food Grade Infrared Thermometers: Materials and Certification

Learn what makes an infrared thermometer food grade, from food contact materials and stainless steel housing to IP ratings, washable surfaces and hygiene standards.

8 min read0 views
— · 0 votes
Contents
  1. What food grade means for an infrared thermometer
  2. Food contact materials on housing and lens
  3. IP rating and washable surfaces
  4. Hygiene standards to check before buying
  5. Certification documents to request
  6. Using an infrared thermometer safely near food
  7. Choosing between probe and infrared models
  8. Food grade infrared thermometer questions
  9. What makes an infrared thermometer food grade?
  10. Can I use any infrared thermometer in a kitchen?
  11. Does an IP rating make a thermometer food safe?
  12. What certificate should I ask for?
  13. Can I put a food grade infrared thermometer in the dishwasher?
  14. Is an infrared thermometer accurate for food temperature?

A food grade infrared thermometer is an infrared thermometer built so its surfaces near food resist cleaning and contact safely. That means a housing of stainless steel or another food contact material, a sealed body rated for washdown, and a design without dirt traps or gaps. Certification documents that design, but the materials and the seal are what make it food grade.

  • Look for stainless steel or another material listed as a food contact material on the sensor housing and probe area.
  • An IP rating shows how well the body resists dust and water during cleaning, not how accurate the reading is.
  • A washable, smooth surface with no seams or crevices is what allows proper cleaning between uses.
  • Food grade certification backs a claim, so ask for the document or a declaration of conformity from the seller.
  • An infrared thermometer measures surface temperature only and does not replace a probe for internal readings.

What food grade means for an infrared thermometer

Food grade describes a thermometer whose parts near food are safe for that contact and can be cleaned properly. An infrared thermometer reads surface temperature without touching the food, so its housing and window sit close to the food rather than in it. The label still matters because spatter, steam and handling bring those surfaces into the food zone.

A food safe design keeps the lens and sensor housing free of paint, loose coatings and porous materials that trap residue. Smooth stainless steel housing and sealed plastic bodies are used for this reason. Open seams, rough textures and exposed screws give residue a place to collect and defeat cleaning.

Food grade certification is the paperwork side of the same idea. A manufacturer may declare that the materials meet a food contact material standard and that the body is sealed to a stated IP rating. The certificate supports the claim and gives you something to check against the unit you receive.

Food contact materials on housing and lens

Food contact materials are the materials declared safe to touch food during normal use. On an infrared thermometer these are the housing, the lens window and any part that could meet a splashed or handled surface. Stainless steel is a familiar choice because it is smooth, resists corrosion and cleans easily.

The lens and the plastic parts around it need the same care. A sealed window of glass or certified plastic keeps moisture out of the electronics and wipes clean without scratching. A housing that claims food grade but carries an uncoated painted finish is worth questioning before use near open food.

Ask which specific parts are covered by the food contact declaration. A seller who names the stainless steel housing, the window and the grip is clearer than one who applies the phrase to the whole product. Match the declared materials to the parts that will sit in your kitchen or serving area.

IP rating and washable surfaces

An IP rating states how well the body keeps out solids and water, and it matters because a thermometer used near food gets wiped often. The first digit covers dust and the second covers water. A higher second digit means the unit tolerates more water exposure during cleaning.

The rating describes the enclosure, not the accuracy of the reading. A well-sealed unit can still drift if its lens is scratched or its emissivity setting is wrong. Buy the seal for cleaning and expect to verify the temperature reading separately.

Washable surfaces are smooth, non-porous and free of deep recesses. Wipe the housing with a damp cloth and a suitable cleaner, then dry it before use. Never immerse a unit beyond the water protection its IP rating states, and never put an infrared thermometer in a dishwasher.

Hygiene standards to check before buying

Hygiene standards for a thermometer cover the body surfaces, the cleaning routine and the storage between uses. A unit with smooth housing, a sealed window and no fabric or foam parts is easier to keep clean. Check that the buttons and the battery cover sit flush and do not trap liquid.

Look for a declaration that names the standard the product is tested against and the parts it covers. A credible seller provides this document on request and matches it to the model you ordered. A logo alone without a document tells you little about the actual materials.

Cleaning instructions belong with the certificate. Ask how the surface should be wiped, which cleaners suit the housing, and whether the lens needs a separate cloth. A thermometer with clear cleaning guidance is easier to keep within your hygiene routine.

Certification documents to request

Food grade certification should arrive as a document you can read, not a phrase on a box. The useful papers are a declaration of conformity for the food contact materials and a test report for the IP rating. A certificate of analysis is not the same document and does not cover materials.

Check the model number on the document against the unit you received. Confirm which parts the declaration covers and that the IP rating matches the product label. If the paperwork lists an older model, ask the seller for the current version.

A supplier who cannot produce the documents may still sell a usable thermometer, but the food grade claim rests on nothing you can verify. Keep the certificate with the unit so a hygiene inspection or a staff handover can find it.

Using an infrared thermometer safely near food

An infrared thermometer reads the surface temperature of a target, not the inside of the food. Point it at a flat area, respect the distance-to-spot ratio in the manual, and let the surface settle after moving food. Steam, frost and shiny foil can mislead the reading.

For internal temperature, use a probe thermometer designed for that job and clean it between uses. An infrared unit suits surface checks such as a griddle, a pan or a chilled platter. Treat every reading as a surface reading and never as a substitute for a probe measurement inside meat or a stew.

Clean the window and the housing after contact with food spatter, and store the unit away from heat. Replace a scratched lens or a cracked housing rather than keep using it. A damaged body no longer matches its food grade certification.

Choosing between probe and infrared models

A probe thermometer enters the food and reads its internal temperature, while an infrared model reads the surface from a distance. The right choice depends on what you are checking and how the tool will be cleaned. Many kitchens keep both because each answers a different question.

Infrared models suit fast surface checks on hot pans, griddles and chilled serving dishes. Probe models suit roasts, sauces and any food where the middle temperature decides doneness. A food grade infrared unit adds sealed housing and washable surfaces for use in a food area.

If you buy an infrared unit for food work, confirm the materials and the IP rating first, then confirm its accuracy is suitable for your task. A unit with a certificate but a wide accuracy tolerance may not suit close temperature checks. Match the tool to the reading you need, not only to its label.

Food grade infrared thermometer questions

What makes an infrared thermometer food grade?

A food grade infrared thermometer is built with food contact materials near the food, a sealed body and washable surfaces. Its certification documents those materials and the IP rating of the housing. The label means the design supports cleaning and safe proximity to food.

Can I use any infrared thermometer in a kitchen?

No, an ordinary infrared thermometer may have an unsealed body, painted housing or seams that trap residue. A food grade model with stainless steel housing and a stated IP rating suits kitchen use better. Check the materials and the seal before using any unit near open food.

Does an IP rating make a thermometer food safe?

An IP rating shows how well the body resists dust and water, and it supports cleaning. It does not by itself declare the housing materials safe for food contact. You need both the IP rating and a food contact material declaration.

What certificate should I ask for?

Ask for a declaration of conformity covering the food contact materials and a test report for the IP rating. Check that the model number on the document matches your unit. Keep the papers with the thermometer for inspections and staff handovers.

Can I put a food grade infrared thermometer in the dishwasher?

No, a dishwasher exposes the unit to heat and water beyond what most handheld thermometers are rated for. Wipe the housing with a damp cloth and a suitable cleaner, then dry it. Follow the cleaning instructions that come with the certificate.

Is an infrared thermometer accurate for food temperature?

An infrared thermometer measures surface temperature, so it is accurate for surfaces but not for the inside of food. Steam, frost and shiny surfaces can distort the reading. Use a probe thermometer when the internal temperature of food matters.

Latest articles