# Folding Table Dimensions: Standard Sizes in Inches, Feet, cm and Meters

Learn folding table dimensions in inches, feet, cm and meters, from a 30 x 72 inch folding table to a folding desk size, plus a table size chart to plan seating.

Folding table dimensions come in a few standard footprints, and knowing them lets you plan a room before you move furniture. A folding table is measured by its length, width and height, and each measurement can be read in inches, feet, centimeters or meters. The sizes below cover the table you set a buffet on, the one you seat guests at, and the smaller folding desk you keep for paperwork. 

- Measure length, width and height separately, because a folding table's footprint and its height are different numbers.
- A 6 ft folding table is the same table as a 30 x 72 inch folding table, so feet and inches describe one size.
- Convert inches to centimeters by multiplying by 2.54, and inches to meters by multiplying by 0.0254.
- Check the height before you buy, because a folding table and a folding desk sit at different levels.
- Plan seats per side from the length, then confirm the room can take the table's open footprint and a walkway.
 

## How a folding table is measured 

A folding table is measured in three dimensions: length, width and height. Length runs along the long edge, width runs across the short edge, and height is the distance from the floor to the tabletop. All three numbers matter when you place a table in a room or match it to chairs. 

Manufacturers list the open dimensions, which describe the table in use. The folded dimensions describe the table when the legs are collapsed and the top is stored flat or upright. Store the folded size as well, because a table that fits a room may still not fit a closet. 

Height is the dimension people forget, and it decides whether a table works for sitting or standing. A dining or buffet table sits lower than a standing work surface. Read the height line before you compare two tables of the same length. 

## Standard folding table sizes in inches 

The 30 x 72 inch folding table is the size many event venues and rental services keep on hand. Its 72 inch length and 30 inch width give a generous rectangular top for serving food or seating guests along both long sides. The same table appears in search results as a 6 ft folding table. 

Smaller rectangular tables come in lengths of 48 inches and 60 inches with a 24 inch or 30 inch width. A square folding table, often called a card table, measures about 34 to 36 inches on each side. Round folding tables are described by diameter, and a 60 inch round is a familiar banquet size. 

The height of a standard folding table is usually 29 to 30 inches at the top, which suits a dining chair. A folding desk may sit at a similar height, though some desk models are taller for standing use. Compare the height line, not just the length and width. 

## Folding table dimensions in feet 

Feet make long tables easy to talk about, and the 6 ft folding table is the shorthand for the 72 inch length. A 4 ft table measures 48 inches, and a 5 ft table measures 60 inches. Width in feet is often quoted as 2.5 ft for a 30 inch top or 2 ft for a 24 inch top. 

Feet are useful for room planning, because floor space and walkways are easier to judge in feet. Multiply the open length by the open width to get the floor area the table claims. Add the space you want around the table for chairs and movement before you decide it fits. 

A folding desk size is often given in feet too, such as a desk a few feet wide. The same foot measurements convert directly to inches, so you can move between the two without a calculator. One foot equals 12 inches, and that single fact links both systems. 

## Folding table dimensions in centimeters 

Folding table dimensions in cm help when you shop from a metric catalog or measure a room in metric units. Convert inches to centimeters by multiplying the inch figure by 2.54. A 72 inch table length becomes about 183 cm, and a 30 inch width becomes about 76 cm. 

The height of about 29 to 30 inches converts to roughly 74 to 76 cm, which is a familiar dining table height in metric countries. A 48 inch table is about 122 cm long, and a 60 inch table is about 152 cm long. These round numbers make a metric table size chart easy to read. 

Round converted figures to the nearest whole centimeter for planning, then check the seller's listed size for the exact number. A conversion gives you a working figure, while the product listing gives the figure you receive. Keep the two separate when you compare tables. 

## Folding table dimensions in meters 

Folding table dimensions in meters suit floor plans and large rooms, where a meter is a comfortable unit. Convert inches to meters by multiplying by 0.0254. A 72 inch length becomes about 1.83 m, and a 30 inch width becomes about 0.76 m. 

In meters, a 6 ft table is about 1.83 m long and 0.76 m wide, which reads quickly on a plan. A square card table of about 34 inches on each side is close to 0.86 m per side. The height of about 30 inches is roughly 0.76 m, matching the width figure by coincidence of the same number. 

Meters are also the unit for the folded table, which is far shorter than the open length. A folded table takes little floor space, and that number belongs on a storage plan. Write the folded size in meters next to the open size so the two do not get confused. 

## Table size chart in inches and cm 

A table size chart in inches and cm puts the familiar sizes side by side, so you can read one line and get both units. The chart below covers the rectangular sizes a home gathering uses, from a small table to the 6 ft length. Use it as a starting reference, then confirm exact figures with the seller. 

Each row gives length and width, and the height of a standard folding table stays near 29 to 30 inches or 74 to 76 cm. Converted values are rounded, so a figure may differ by a centimeter from a listed size. Match the chart to the room and to the number of seats you need. 

A foldable table size chart works the same way for models with a different top shape. For a round table, substitute the diameter for length and width. For a folding desk, read the chart for surface area and check the height separately. 
| Length | Width | Length in cm | Width in cm | 
| 48 in (4 ft) | 24 in | about 122 cm | about 61 cm | 
| 60 in (5 ft) | 30 in | about 152 cm | about 76 cm | 
| 72 in (6 ft) | 30 in | about 183 cm | about 76 cm | 
| 34 in (square) | 34 in | about 86 cm | about 86 cm |  

## Folding desk dimensions compared with tables 

A folding desk is a work surface first, so its folding desk dimensions follow the needs of a seat and a screen. Desks tend to be narrower than a 30 x 72 inch folding table and deeper than a slim buffet table. Some desks fold flat against a wall, which matters more than a few extra inches of top. 

Check the knee space under a folding desk before you choose it, because a crossbar can limit where your legs go. Height matters for sitting comfort, and a standing desk model runs taller than a dining height. A desk with a lower crossbar may not fit an office chair with arms. 

A folding desk size in a small room is a balance between top area and open floor. Measure the chair, the screen and the reach of your arms, then pick the surface that holds them without crowding. The desk still folds away, so the open size can be larger than the storage corner suggests. 

## Seating and room space around a folding table 

Seating capacity per folding table depends on the length and on how closely guests sit. Allow about 24 inches of table edge for each seated guest at a dining table. A 72 inch side can seat three guests with room to spare, and both long sides of a 30 x 72 inch table can seat six in total. 

Round tables change the count, because guests sit around a curve rather than a straight edge. A 60 inch round table seats a group around its rim, and the diameter decides how many places fit. Measure the diameter and divide the rim into seat widths to estimate places. 

Room space around the table matters as much as the table itself. Leave enough floor behind each chair for a person to push back and walk past. The open footprint plus chair pull-out space plus a walkway equals the floor area the gathering needs. 

## Folding Table Size Questions 

### What are the dimensions of a 6 ft folding table? 

A 6 ft folding table measures 72 inches long and usually 30 inches wide, with a height near 29 to 30 inches. In metric units that is about 183 cm long, 76 cm wide and 74 to 76 cm high, or roughly 1.83 m by 0.76 m. The 30 x 72 inch folding table and the 6 ft folding table are the same size. 

### What is a folding table dimensions chart in inches? 

A folding table dimensions chart in inches lists length, width and height for each size. Rectangular models run from about 48 inches to 72 inches long, with widths of 24 or 30 inches. Square card tables measure about 34 to 36 inches per side, and round tables are listed by diameter. 

### How do I convert folding table dimensions to cm? 

Convert folding table dimensions to cm by multiplying each inch figure by 2.54. A 72 inch length becomes about 183 cm, and a 30 inch width becomes about 76 cm. The height of 29 to 30 inches converts to roughly 74 to 76 cm. 

### What are folding table dimensions in meters? 

Folding table dimensions in meters come from multiplying inches by 0.0254. A 72 inch length is about 1.83 m, and a 30 inch width is about 0.76 m. The height near 30 inches is also about 0.76 m. 

### What is a typical folding desk size? 

A folding desk size varies more than a folding table size, because desks follow the work you do at them. Check the height first, since a sitting desk and a standing desk differ. Then check knee space under the top, which a crossbar can reduce. 

### How many people fit at a folding table? 

Seating capacity per folding table depends on the length and the space you allow each guest. A common planning figure is about 24 inches of edge per seated person. A 72 inch side seats three at that spacing, and both long sides of a 30 x 72 inch table seat six.
