# Folding Shelf and Tray Table Plans

Learn how folding shelf and tray table plans work, from tabletop size and hinged leg brackets to a fold-down wall table that tucks away after guests leave.

Folding shelf and tray table plans show you how to build a small table whose legs or shelf fold flat against the top or the wall. The plans give you cutting sizes for a wood plywood top, the placement of hinged leg brackets, and a simple frame that supports drinks and plates. You choose the tabletop dimensions first, then match the folding hardware and leg length to that shape. The finished piece serves a gathering and then folds out of the way. 

## Setting tabletop dimensions first 

Tabletop dimensions decide everything else in a folding tray table plan. A tray table carries a plate, a glass and a small dish, so a narrow rectangle or a soft square works well. Mark the size on paper and check it against the seat it will serve before you cut wood plywood. The top also needs a lip or raised edge when it will hold drinks on a soft floor. 

## Hinged leg brackets and folding action 

Hinged leg brackets let each leg swing from flat against the top to a locked upright position. The brackets must sit square to the tabletop edges, or the table will rock when it opens. Fit the legs to the brackets before you attach anything to the top, and test the fold with the table upside down. A small catch or strap keeps the legs closed while the table is stored. 

## Building a fold-down wall table 

A fold-down wall table is a folding shelf table that stays attached to a wall and drops flat when not in use. The wall frame carries the hinge and takes the load, so it must be fixed into solid structure rather than plaster alone. A folding shelf table of this kind needs a support leg, a bracket or a chain to hold it level when open. If you are unsure about the wall fixing, have a trained installer set the frame. 

## Questions about folding table plans 

### What do folding shelf table plans include? 

Folding shelf table plans include a cut list, the tabletop dimensions, the leg layout and the folding hardware positions. Good plans also show how the shelf or support arm locks when the table is open. Read the whole plan before buying wood plywood, because the fold mechanism decides the leg length. 

### Are folding tray table plans hard to build? 

Folding tray table plans suit a beginner who can measure, saw and drive screws squarely. The hard part is aligning the hinged leg brackets so the legs fold without binding. Practice the fold on a dry fit before you fix the top in place. A second pair of hands helps when you attach the legs. 

### Which wood should I use for a folding tray table? 

Wood plywood is a stable choice for a folding tray table top because it resists warping across a wide, thin panel. A hardwood plywood face takes a finish well and holds up to plates and glasses. Solid wood works for the legs and the frame around the top. Seal the edges of the plywood so moisture does not get into the layers. 

### Can a folding shelf table hold a full tray? 

A folding shelf table holds a full tray when the hinges, brackets and wall or leg support are sized for the load. The weak point is the hinge line, so use brackets rated for the weight and fix them into solid material. Keep heavy items over the legs or the wall frame. Test the open table with a light load before you trust it with food.
