THE AT-HOME SUPPER CLUB

DIY Conversation Starter Cards

Make your own conversation starter cards for a dinner or party: choose prompts, design and print the deck, then cut and laminate it for the table.

8 min read0 viewsDIY Conversation Starter Cards
— · 0 votes
Contents
  1. Set the purpose of the deck
  2. Collect and write conversation prompts
  3. Write prompts that fit your guests
  4. Design the card layout
  5. Print and cut the deck
  6. Laminate or protect the cards
  7. Use the cards at the table
  8. Store and reuse the deck
  9. Questions About DIY Conversation Cards
  10. How do I make icebreaker question cards?
  11. What should I write on DIY conversation cards?
  12. Can I make prompt cards without design software?
  13. What paper should I use for conversation cards?
  14. How many cards should a conversation deck hold?
  15. Do I need to laminate the cards?

DIY conversation starter cards are small prompt cards you write, print and cut yourself, then set on the table to give a gathering a little shape. You choose the questions, design the layout and print the deck at home. The result is a set of icebreaker question cards that fit your guests and your table.

  • Pick prompts that suit the group and keep each one short enough to read aloud.
  • A simple template with one question per card keeps the deck easy to print and cut.
  • Print on cardstock so the cards survive handling on a table.
  • Laminating or using a protective sleeve keeps a reusable deck clean.
  • Store the deck in a small box and note which prompts worked for next time.

Set the purpose of the deck

A conversation starter deck works well when you decide its job before you write anything. The job might be opening a meal, mixing guests who have not met or giving a quiet table something to reach for. Each job asks for a different kind of prompt.

Opening prompts suit a whole table and should be light and easy to answer. Mixing prompts work better as pairs or small groups, where each person gets a turn. A deck for a family table can hold gentler questions than a deck for a party of adults.

Write the purpose on a note and keep it beside you while you draft. The note stops you from drifting into prompts that do not serve the gathering. It also tells you how many cards you need and how big each one should be.

Collect and write conversation prompts

Good conversation prompts are short, open and answerable by anyone at the table. A question that needs a long explanation will stall the room, while a closed question ends the exchange. Aim for a prompt a person can answer in a sentence or two.

Gather material from your own life and from the people you know. Memories, small preferences, mild opinions and imagined situations all give discussion starters that people can pick up. Keep a running list on your phone or in a notebook as ideas arrive.

Edit the list before you design anything. Cut duplicates, rewrite anything vague and read each prompt aloud to hear how it sounds. A prompt that feels awkward out loud will feel awkward at the table.

Write prompts that fit your guests

The prompts should match the people who will sit down, so think about ages, interests and how well guests know each other. A group of old friends can handle prompts with more history, while a table of new acquaintances needs lighter ground. Writing for one specific gathering is easier than writing for every gathering.

Keep the deck free of prompts that put a person on the spot about money, health, family or work troubles. A prompt that asks someone to explain a private matter turns a game into an interrogation. Choose topics that anyone can answer or skip without embarrassment.

Mix the kinds of prompts so the deck has variety. Fact prompts, memory prompts, opinion prompts and imaginative prompts keep a table moving between moods. A balanced mix stops the deck from feeling like a quiz.

Design the card layout

A clear card layout makes a DIY deck look deliberate and reads well across a table. Each card needs one prompt in a type size large enough to read at arm's length. Space around the text keeps the card from feeling crowded.

Card templates for word processors and design tools save time and keep every card the same size. Build one master card, then duplicate it for each prompt in the deck. A small label or number on the back helps you sort the deck later.

Choose a font with clear letterforms and set the prompt in sentence case. Long prompts can be broken over two or three lines, but keep the whole card readable at a glance. Add a thin border so the cutting line is visible after printing.

Print and cut the deck

Printing on cardstock gives the cards enough body to be handled and passed around. Standard paper works for a single evening but bends quickly in a stack. A heavier stock also prints cleaner edges when you cut.

Print one test sheet before you run the full deck, and check the alignment of the text on the card. A small shift in the printer can push a prompt close to the cutting line. Adjust the margins until the test sheet looks right.

Cut the cards with a paper trimmer for straight edges, or use scissors and a ruler for a small deck. A corner rounder softens sharp points on cards that guests will handle. Cut on a mat to protect the table underneath.

Laminate or protect the cards

Laminating turns a paper deck into a set that survives spills and repeated use. A home laminator and pouches handle small cards well, and the sealed edge keeps moisture out. Trim the laminated cards with a margin so the seal stays intact.

A protective sleeve or a spray sealant is an alternative when no laminator is at hand. Sleeves let you swap prompts later without reprinting the card. Sealant needs time to dry in a ventilated space before the cards go on a table.

Keep the finished cards away from open flame and hot surfaces when they sit on a table. Laminated cardstock can warp near heat, and paper cards near a candle are a fire risk. Place the deck on a stable spot away from serving dishes.

Use the cards at the table

A conversation card deck works when it is visible but not forced on anyone. Set the stack in the middle of the table or in a small holder and mention it once. Guests can draw a card when a lull arrives.

Table conversation cards can follow a simple rhythm: draw one, read it aloud and let each person answer in turn. A host can model the first answer to show how short an answer can be. Pass the deck along so the draw moves around the table.

Watch the room and retire the deck when the talk takes off on its own. The cards are a support for conversation, not a schedule. A host who reads the mood keeps the deck a help rather than a task.

Store and reuse the deck

A small box, a fabric pouch or a tied stack keeps the deck together between gatherings. Label the box with the kind of gathering the deck was written for. Storage protects the edges and makes the deck easy to find.

Note which prompts worked and which fell flat, then rewrite the weak ones for the next event. A deck improves when it is edited between uses. Keep spare blank cards in the box for new ideas.

Printable question cards can be reprinted if the deck grows or a card is lost. Save the master file with the layout and the full prompt list. A saved file lets you rebuild the deck without starting over.

Questions About DIY Conversation Cards

How do I make icebreaker question cards?

Make icebreaker question cards by writing short, open prompts that anyone at the table can answer. Set one prompt on each card in a clear template, print on cardstock and cut the sheets apart. Laminate the finished cards if the deck will be used more than once.

What should I write on DIY conversation cards?

Write prompts that are short, open and easy to answer in a sentence or two. Mix memory, opinion and imaginative prompts so the deck has variety, and avoid anything that asks a guest about private matters. Read each prompt aloud before you commit it to the deck.

Can I make prompt cards without design software?

Yes, you can make prompt cards in a word processor with a simple table layout. Set one card per cell, keep the type large and add a border to mark the cutting line. A saved template lets you print the same layout again for a second deck.

What paper should I use for conversation cards?

Cardstock gives conversation cards enough body to be handled and passed around a table. Standard paper works for a single evening but bends in a stack. Print a test sheet first to check that the text sits inside the cutting lines.

How many cards should a conversation deck hold?

The size of the deck depends on the gathering and how long the cards will sit on the table. A deck of a few dozen prompts gives a table plenty to draw from without overwhelming anyone. You can print more cards later if the deck runs short.

Do I need to laminate the cards?

Laminating is optional but helps a deck survive spills and repeated handling. A protective sleeve or a spray sealant is an alternative when no laminator is available. Trim laminated cards with a small margin so the sealed edge stays intact.

Read next

Latest articles