# Cooling Drinks Fast in a Cooler

Learn how to cool drinks fast in a cooler using an ice bath, salt water, and a pre-chilled box, so guests get cold beverages without a long wait.

Cooling drinks fast in a cooler comes down to surface contact and a cold reservoir: surround each can or bottle with a mix of ice and water rather than ice alone. Water carries heat away from the container far quicker than air or dry ice cubes, so the drink chills in a fraction of the time a packed cooler of loose ice needs. The pages below cover the ice and drink ratio, pre-chilling the box, and the salt water ice bath that drops the temperature of the melt further. 

## Why an ice and water bath works 

An ice and water bath cools drinks quickly because liquid touches the whole container instead of only the points where cubes rest. Ice alone leaves air gaps, and air insulates rather than conducts, so a can sits in a cold box without losing heat fast. A slurry of melting ice and water keeps the surface of every drink in constant contact with a cold liquid. Stirring the bath or adding fresh ice keeps that contact going as the melt warms. 

## Getting the ice to drink ratio right 

The ice to drink ratio in a cooler decides how fast the whole batch chills and how cold it stays once guests arrive. Fill the cooler roughly half with ice and add water until it reaches the top of the ice, then set drinks in so they are mostly submerged. Too many drinks for the ice leaves the bath warm and slow, so stage part of the batch and replenish as space opens. Cold drinks go in first, because the bath then spends its chill on keeping them cold rather than pulling heat from warm cans. 

## Pre-chilling the cooler and the drinks 

Pre-chilling the cooler itself removes the heat the box would otherwise pull from the ice and the drinks. Load the cooler with ice a while before the gathering, or store it somewhere cold so its walls start near the temperature of the bath. Chilled drinks from the refrigerator cool far faster in the bath than room-temperature ones, so move them to the fridge ahead of time. Keep the lid closed between servings, since an open cooler loses its cold air and slows the chill of everything inside. 

## Questions about fast drink chilling 

### What is the fastest way to cool drinks in a cooler? 

The fastest way to cool drinks in a cooler is a bath of ice and water that covers most of each container, plus a pinch of salt to lower the melt temperature. Water contact moves heat out of the can or bottle much faster than dry ice cubes alone. Keep the lid shut and add fresh ice as the first batch melts. Chilled drinks placed in the bath cool faster still than warm ones. 

### Does salt water ice bath chill drinks faster? 

Yes, a salt water ice bath chills drinks faster than plain ice water because salt lowers the freezing point of the melt. The salted water can sit below the freezing point of pure water while staying liquid, so heat leaves the drink faster. Stir the salt through the ice and water until it dissolves and top up with ice as needed. Rinse the outside of bottles before serving so no salt reaches the glass. 

### How much ice do I need for a party cooler setup? 

A party cooler setup needs enough ice to fill roughly half the box, with water added to cover that ice. The bath should reach most of the way up each drink so the liquid touches as much of the container as possible. Plan for extra ice to replace what melts during the gathering, since the bath loses chill as it works. Set a thermometer in the bath if you want to check the temperature through the event. 

### Can I cool drinks in a cooler without water? 

You can cool drinks in a cooler with ice alone, but the process is slower than an ice and water bath. Dry cubes leave air pockets around each container, and that air slows the transfer of heat away from the drink. If water is not an option, pack the ice tightly around the drinks and keep the lid closed. Adding water later, once some ice has melted, speeds the chill considerably.
