THE AT-HOME SUPPER CLUB

Blind Hem Stitch on a Sewing Machine

Learn how the blind hem stitch works on a sewing machine, how to set up the blind hem foot, and which settings to adjust for a nearly invisible hem.

3 min read0 views
— · 0 votes
Contents
  1. How the stitch is formed
  2. Setting up the blind hem foot
  3. Settings on Brother and Singer machines
  4. Blind Hem Stitch Questions
  5. What does a blind hem stitch foot do?
  6. Can I use a blind hem stitch on a Brother machine?
  7. Does the Singer heavy duty machine have a blind hem stitch?
  8. Which settings do I change for machine hemming?

A blind hem stitch on a sewing machine creates a hem that shows almost nothing on the right side of the fabric. The machine sews a straight run of stitches with a periodic wide zigzag that catches a folded edge, so the finished hem looks hand-sewn. This page explains the stitch, the foot it uses and the settings that make it work.

How the stitch is formed

The blind hem stitch combines straight stitches with an occasional wide zigzag that reaches into a folded flap of fabric. The needle spends most of its time on the hem allowance and only briefly crosses to catch a few threads of the main fabric. When the hem is turned back to the right side, those caught threads hold the fold in place without showing. Adjustment of stitch width and the position of the fold controls how much the stitch grips.

Setting up the blind hem foot

A blind hem foot, also called a blind hem presser foot, carries a small adjustable guide that keeps the folded edge aligned with the needle. The guide sits in the fold and the needle swings just past it to catch the fabric. Setting the guide correctly matters more than the stitch length for a clean result. Test the position on a scrap of the same fabric before you sew the real hem.

Settings on Brother and Singer machines

Setting up the blind hem stitch on a Brother machine or a Singer heavy duty machine follows the same logic on both. Select the blind hem stitch with the stitch selection dial or the menu, then lower the stitch width so the zigzag just reaches the fold. Reduce the stitch length for a finer hold and loosen the tension slightly so the caught threads do not pucker. The exact numbers depend on the fabric weight and the machine model, so check the manual for your own settings.

Blind Hem Stitch Questions

What does a blind hem stitch foot do?

A blind hem stitch foot holds the folded hem against an adjustable guide so the needle catches only a few threads. The guide keeps the fold at a steady distance from the stitch line, which is what makes the hem nearly invisible. Without the foot, the fold drifts and the zigzag either misses the fabric or shows on the right side.

Can I use a blind hem stitch on a Brother machine?

Yes, a Brother sewing machine with a blind hem stitch in its selection will sew one. You choose the stitch, attach the blind hem foot and set the width so the zigzag just crosses the fold. Check the machine manual for the stitch number and the recommended settings on your model.

Does the Singer heavy duty machine have a blind hem stitch?

The Singer heavy duty machine includes a blind hem stitch among its built-in stitches on models that offer it. You select it with the stitch selection dial and use a blind hem foot for the fold. Confirm the stitch is listed for your specific model before you plan a project around it.

Which settings do I change for machine hemming?

Stitch width, stitch length and thread tension are the three settings that shape a blind hem on a sewing machine. Width controls how far the zigzag reaches into the fold, and length controls how often it repeats. Tension decides whether the caught threads lie flat or pull the fabric tight.

Read next

Latest articles